Home > Press > University of Pennsylvania Researchers Demonstrate a Flexible, One-Step Assembly of Nanoscale Structures
![]() |
Abstract:
Scientists at the University of Pennsylvania have created a one-step, repeatable method for the production of functional nanoscale patterns or motifs with adjustable features, size and shape using a single master "plate."
Researchers took advantage of the elastic instability of a widely used, flexible polymer membrane, polydimethylsiloxane, or PDMS. When exposed to a solvent, circular pores in the membrane elliptically deform, and elastic interactions between them generate long-range orientational order of their axes into a "diamond plate" pattern. By lacing the solvent with iron nanoparticles, the team found that evaporation of the solvent drives the assembly of the nanoparticles onto the membrane surface along these distorted pores.
This results in two-dimensional patterns with sub-100 nanometer features. The traditional fabrication process can take as long as a month and cost $50,000 per print. In this new process, a master can be made for a fraction of the cost and can be reused many times. The Penn team's technique does not require delicate surface preparation or the complex chemistry of standard lithographic processes. Instead, the new process relies on patterns that form spontaneously in equilibrium. The resulting, "diamond-plate" pattern persists over the entire sample, as large as a square centimeter, with no imperfections.
The features of the resultant nanoparticle patterns are up to 10 times sharper than the original membrane. The resulting symmetry of the film can be transferred onto a substrate, both flat or curved, where it can be used to generate similar anisotropic magnetic, photonic, phononic and plasmonic properties.
"These functional nano-motifs could in turn benefit novel technologies that are sensitive to local environment change such as smart clothing, biomarkers and eco-friendly buildings," Shu Yang, assistant professor in the Department of Materials Science and Engineering of the School of Engineering and Applied Science at Penn, said. "Using similar pattern transformation principles, our technique could be extended to pattern a variety of material systems such as polymers and composites, creating a new design mechanism for nanoscale manufacturing."
The team modeled the elastic instability of the membrane in terms of elastically interacting "dislocation dipoles" and found complete agreement between the theoretical ground state and the observed pattern. This model allows for the manipulation of the structural details of the membrane to tailor the elastic distortions and generate a variety of nanostructures.
"It is both surprising and serendipitous that the simple theory is corroborated by experiment and by complex numerical simulations by other groups," Randall Kamien, professor in the Department of Physics and Astronomy in the School of Arts and Sciences at Penn, said.
The natural world provides many examples of the type of intrinsic, bottom-up effects that engineers see here, from the arrangement of growing leaves on a plant to the pattern of animal stripes to fingerprints. In these systems, instabilities, packing constraints and simple geometries drive the formation of delicate, detailed and beautiful patterns. Mechanical instabilities in soft polymers, precipitated by dewetting, swelling and buckling during the production stage, are often viewed as failure mechanisms that can interfere with the performance of devices. However, these instabilities are now being exploited to assemble complex patterns, to fabricate novel devices such as stretchable electronics and flexible microlenses and to provide a metrology for measuring elastic moduli and the thickness of ultrathin films.
PDMS membranes have been widely used in soft lithography for low-cost fabrication of microdevices. The Penn team replica-molded a PDMS membrane with circular pores from an array of 1 μm diameter silicon pillars spaced 2 μm apart on a square lattice. When exposed to the organic solvent toluene, PDMS gels swell by as much as 130 percent. As the osmotic pressure builds, the circular pores in the PDMS deform and eventually snap shut to relieve the stress, much as the joints in railways and bridges expand and contract to maintain structural integrity in response to changes in moisture and temperature.
Because the elastic deformation of the PDMS membrane is induced by solvent swelling, the diamond plate pattern in PDMS is stable in the wet state and snaps back to the original square lattice once the solvent evaporates. To capture the diamond plate before evaporation and, more important, to utilize this deformation for assembly of complex functional structures, the team suspended superparamagnetic Fe3O4 nanoparticles in toluene and applied the solution to the PDMS membrane. As the PDMS swells, the convective assembly of the nanoparticles follows, faithfully replicating the deformed PDMS membrane. Once dry, the elastic membrane returns to its original state and can be reused.
The study was published in the journal Nano Letters and was conducted by members of the Laboratory for Research on the Structure of Matter at Penn: Ying Zhang, Anna Peter, Pei-Chun Lin and Yang of the Department of Materials Science and Engineering and Elisabetta A. Matsumoto and Kamien of the Department of Physics and Astronomy.
Funding was provided by the National Science Foundation MRSEC Program and an NSF Career Award bestowed upon Yang.
####
For more information, please click here
Contacts:
Office of University Communications
200 Sansom Place East
3600 Chestnut Street
Philadelphia, PA 19104-6106
215-898-8721
Jordan Reese
215-573-6604
Copyright © University of Pennsylvania
If you have a comment, please Contact us.Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.
Related News Press |
News and information
Flexible electronics integrated with paper-thin structure for use in space January 17th, 2025
Quantum engineers ‘squeeze’ laser frequency combs to make more sensitive gas sensors January 17th, 2025
Govt.-Legislation/Regulation/Funding/Policy
Quantum engineers ‘squeeze’ laser frequency combs to make more sensitive gas sensors January 17th, 2025
Chainmail-like material could be the future of armor: First 2D mechanically interlocked polymer exhibits exceptional flexibility and strength January 17th, 2025
Chip Technology
Enhancing transverse thermoelectric conversion performance in magnetic materials with tilted structural design: A new approach to developing practical thermoelectric technologies December 13th, 2024
Bringing the power of tabletop precision lasers for quantum science to the chip scale December 13th, 2024
Nanofibrous metal oxide semiconductor for sensory face November 8th, 2024
Discoveries
Quantum engineers ‘squeeze’ laser frequency combs to make more sensitive gas sensors January 17th, 2025
Announcements
Quantum engineers ‘squeeze’ laser frequency combs to make more sensitive gas sensors January 17th, 2025
The National Space Society Congratulates SpaceX on Starship’s 7th Test Flight: Latest Test of the Megarocket Hoped to Demonstrate a Number of New Technologies and Systems January 17th, 2025
![]() |
||
![]() |
||
The latest news from around the world, FREE | ||
![]() |
![]() |
||
Premium Products | ||
![]() |
||
Only the news you want to read!
Learn More |
||
![]() |
||
Full-service, expert consulting
Learn More |
||
![]() |