Nanotechnology Now

Our NanoNews Digest Sponsors
Heifer International

Wikipedia Affiliate Button

Home > Press > Teijin to Participate in Nano Tech 2016

Abstract:
Teijin Limited announced today that it will exhibit a wide range of nanotech materials and products incorporating advanced Teijin technologies during the International Nanotechnology Exhibition and Conference (nano tech 2016), the world’s largest nanotechnology show, at Tokyo Big Sight in Tokyo, Japan from January 27 to 29.

Teijin to Participate in Nano Tech 2016

Tokyo, Japan | Posted on January 21st, 2016

Teijin’s booth (Stand 4E-09) will present nanotech materials and products for sustainable transportation, information and electronics, safety and protection, environment and energy, and healthcare, including the following:

■ Nanofront®, an ultra-fine polyester fiber with an unprecedented diameter of just 700 nanometers, features slip-resistance, heat shielding, wiping and filtering properties. It is used for diverse applications, including sportswear, cosmetics and industrial applications such as filters and heat-shielding sheets.

■ Carbon nanotube yarn (CNTy) is 100%-CNT continuous yarn offering high electrical and thermal conductivity, easy handling and flexibility. Uses including space, aerospace, medical and wearable devices are envisioned. A motor using CNTy as its coil, developed by Finnish Lappeenranta University of Technology, will be exhibited first time in Japan.

■ NanoGram® Si paste is a printed electronics material containing 20nm-diameter silicon nanoparticles for photovoltaic cells capable of high conversion efficiency.

■ Teijin®Tetoron® multilayer film is a structurally colored multilayer polyester film that utilizes the interference of each multilayer’s optical path difference rather than dyes or pigments. Decorative films for automotive and other applications will be exhibited.

■ High-performance membranes, including a high-precision porous thin polyethylene membrane and multilayer membrane composites for micro filters, are moisture-permeable waterproof sheets.

■ Carbon Alloy Catalyst (CAC) (under development) is platinum free catalyst made from polyacrylonitrile (precursor of carbon fiber) in combination with iron species, which is less expensive and more readily available than platinum, enabling production for reduced cost and in higher volumes. Fuel cells in which the cathode consists of the CAC without the platinum catalyst can generate exceptionally high electric power.

■ Carbon nanofiber (under development) is a highly conductive carbon nanofiber with an elliptical cross section consisting of well-developed graphite layers ordered in a single direction. Envisioned applications include additives for lithium ion secondary batteries (LIBs) , thermal conducting materials and plastic-reinforcing materials, among others.

####

About Teijin Limited
Teijin (TSE: 3401) is a technology-driven global group offering advanced solutions in the areas of sustainable transportation, information and electronics, safety and protection, environment and energy, and healthcare. Its main fields of operation are high-performance fibers such as aramid, carbon fibers & composites, healthcare, films, resin & plastic processing, polyester fibers, products converting and IT. The group has some 150 companies and around 16,000 employees spread out over 20 countries worldwide. It posted consolidated sales of JPY786.2 billion (USD 6.6 billion) and total assets of JPY 823.7 billion (USD 6.9 billion) in the fiscal year ending March 31, 2015.

For more information, please click here

Contacts:
Corporate Communications
Teijin Limited
+81 3 3506 4055

Copyright © Teijin Limited

If you have a comment, please Contact us.

Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.

Bookmark:
Delicious Digg Newsvine Google Yahoo Reddit Magnoliacom Furl Facebook

Related News Press

News and information

Self-driving microrobots December 10th, 2019

CEA-Leti Thin-Film Batteries Target Extended Applications and Improved Performance in Medical Implants: IEDM 2019 Paper Reports Millimeter-Scale TFBs Exhibit the Best Performance In Both Energy and Power Densities December 10th, 2019

Arrowhead Pharmaceuticals Closes Underwritten Public Offering with Gross Proceeds of $266.8 Million December 7th, 2019

'Buildings' in human bone may hold key to stronger 3D-printed lightweight structures December 6th, 2019

Chemistry

Self-driving microrobots December 10th, 2019

Scientists probe the limits of ice: Transition between ice and liquid water gets fuzzy at the nanoscale November 9th, 2019

Thin films

CEA-Leti Thin-Film Batteries Target Extended Applications and Improved Performance in Medical Implants: IEDM 2019 Paper Reports Millimeter-Scale TFBs Exhibit the Best Performance In Both Energy and Power Densities December 10th, 2019

Graphene/ Graphite

Graphene takes off in composites for planes and cars: The Graphene Flagship identified the strategic advantages of integrating graphene into fibre composites, used to build planes and cars December 5th, 2019

NAUM’19 reviewed the increasing contribution of graphene nanotubes to sustainable development November 21st, 2019

Better biosensor technology created for stem cells: Rutgers innovation may help guide treatment of Alzheimer's, Parkinson's diseases November 12th, 2019

Nanotubes/Buckyballs/Fullerenes/Nanorods

Research shows old newspapers can be used to grow carbon nanotubes: Newspapers provide a green, economical way to produce carbon nanotubes November 22nd, 2019

NAUM’19 reviewed the increasing contribution of graphene nanotubes to sustainable development November 21st, 2019

Moving diagnostics out of the lab and into your hand: Electrochemical sensor platform technology could enable portable, multiplexed, point-of-care diagnostics for a wide range of applications November 11th, 2019

How perovskite in solar cells recrystallizes and why modified carbon nanotubes can help overcome the reproducibility problem by making use of this October 18th, 2019

Nanomedicine

Arrowhead Pharmaceuticals Closes Underwritten Public Offering with Gross Proceeds of $266.8 Million December 7th, 2019

Artificial cells act more like the real thing December 6th, 2019

Arrowhead Pharmaceuticals Announces Pricing of Underwritten Public Offering of Common Stock December 5th, 2019

Arrowhead Pharmaceuticals Announces Proposed Underwritten Offering of Common Stock December 3rd, 2019

Materials/Metamaterials

Toward more efficient computing, with magnetic waves: Circuit design offers a path to 'spintronic' devices that use little electricity and generate practically no heat November 29th, 2019

NAUM’19 reviewed the increasing contribution of graphene nanotubes to sustainable development November 21st, 2019

Scientists probe the limits of ice: Transition between ice and liquid water gets fuzzy at the nanoscale November 9th, 2019

Disordered proteins become stable, 'super-sticky' materials: Improved protein control could lead to wound-healing gels and other applications November 3rd, 2019

Announcements

Self-driving microrobots December 10th, 2019

CEA-Leti Thin-Film Batteries Target Extended Applications and Improved Performance in Medical Implants: IEDM 2019 Paper Reports Millimeter-Scale TFBs Exhibit the Best Performance In Both Energy and Power Densities December 10th, 2019

Arrowhead Pharmaceuticals Closes Underwritten Public Offering with Gross Proceeds of $266.8 Million December 7th, 2019

'Buildings' in human bone may hold key to stronger 3D-printed lightweight structures December 6th, 2019

Energy

Graphene takes off in composites for planes and cars: The Graphene Flagship identified the strategic advantages of integrating graphene into fibre composites, used to build planes and cars December 5th, 2019

The Greenest Diet: Bacteria Switch to Eating Carbon Dioxide: Such bacteria may, in the future, contribute to new, carbon-efficient technologies November 27th, 2019

'Messy' production of perovskite material increases solar cell efficiency November 15th, 2019

Go with the flow: Scientists design new grid batteries for renewable energy: New blueprint for affordable, sustainable 'flow batteries' developed at Berkeley Lab could accelerate an electrical grid powered by the sun and wind November 8th, 2019

Automotive/Transportation

Graphene takes off in composites for planes and cars: The Graphene Flagship identified the strategic advantages of integrating graphene into fibre composites, used to build planes and cars December 5th, 2019

New electrodes could increase efficiency of electric vehicles and aircraft November 22nd, 2019

Argonne collaborates to review current battery recycling processes for electric vehicles November 8th, 2019

Super-strong magnetic supercrystals can assemble themselves October 25th, 2019

Aerospace/Space

Graphene takes off in composites for planes and cars: The Graphene Flagship identified the strategic advantages of integrating graphene into fibre composites, used to build planes and cars December 5th, 2019

New electrodes could increase efficiency of electric vehicles and aircraft November 22nd, 2019

Do you Kyoto? World-leading companies share their approaches to environmentally friendly business at NAUM’19 October 14th, 2019

The National Space Society Mourns the Passing of Alexei Leonov, The First Spacewalker October 14th, 2019

Industrial

Matching Investment Program (MIP) Leverages $140K Empire State Development/NYSTAR Funding to SUNY Poly’s CATN2 to Enable $1.5M in Matching Commitments from Industry Partners: Investment Funds Faculty Research Related to Advanced Materials, Genomics, and Semiconductor Reliability October 18th, 2019

The future of materials with graphene nanotubes starts in Japan September 19th, 2019

A modified device fabrication process achieves enhanced spin transport in graphene August 6th, 2019

CEA’s Precise Localization Technology Boosts Quality Control & Efficiency in Desoutter Tools: Algorithm and Embedded Receptors in Desoutter’s Electric & Power Tools Deliver Real-Time Monitoring & Help Meet Industry 4.0 Goals June 26th, 2019

Battery Technology/Capacitors/Generators/Piezoelectrics/Thermoelectrics/Energy storage

CEA-Leti Thin-Film Batteries Target Extended Applications and Improved Performance in Medical Implants: IEDM 2019 Paper Reports Millimeter-Scale TFBs Exhibit the Best Performance In Both Energy and Power Densities December 10th, 2019

New electrodes could increase efficiency of electric vehicles and aircraft November 22nd, 2019

Argonne collaborates to review current battery recycling processes for electric vehicles November 8th, 2019

Self-assembled microspheres of silica to cool surfaces without energy consumption November 8th, 2019

Events/Classes

"Inverse Design for Self-Assembly: Patchy Particles, Machine Learning, and the Truth about Entropy" December 3rd, 2019

Arrowhead Pharmaceuticals to Participate in Upcoming December 2019 Conferences November 26th, 2019

Arrowhead Pharmaceuticals Reports Fiscal Year 2019 Results November 25th, 2019

Onto Innovation to Participate in the 8th Annual NYC Investor Summit 2019 November 21st, 2019

Fuel Cells

Activity of fuel cell catalysts doubled: Modelling leads to the optimum size for platinum fuel cell catalysts July 5th, 2019

Artificial photosynthesis transforms carbon dioxide into liquefiable fuels May 22nd, 2019

Current generation via quantum proton transfer February 1st, 2019

Researchers use jiggly Jell-O to make powerful new hydrogen fuel catalyst: The inexpensive new material can split water just as efficiently as costly platinum December 14th, 2018

Solar/Photovoltaic

Clear, conductive coating could protect advanced solar cells, touch screens: New material should be relatively easy to produce at an industrial scale, researchers say November 22nd, 2019

'Messy' production of perovskite material increases solar cell efficiency November 15th, 2019

Self-assembled microspheres of silica to cool surfaces without energy consumption November 8th, 2019

Go with the flow: Scientists design new grid batteries for renewable energy: New blueprint for affordable, sustainable 'flow batteries' developed at Berkeley Lab could accelerate an electrical grid powered by the sun and wind November 8th, 2019

Printing/Lithography/Inkjet/Inks/Bio-printing/Dyes

Large scale integrated circuits produced in printing press: All-printed large-scale integrated circuits based on organic electrochemical transistors November 15th, 2019

Highest-throughput 3D printer is future of manufacturing: Rapid manufacturing on-demand could put warehouses, molds into the past October 17th, 2019

Physicists make graphene discovery that could help develop superconductors: Rutgers-led research could reduce energy use, improve electronic devices August 1st, 2019

New record: 3D-printed optical-electronic integration June 18th, 2019

NanoNews-Digest
The latest news from around the world, FREE



  Premium Products
NanoNews-Custom
Only the news you want to read!
 Learn More
NanoStrategies
Full-service, expert consulting
 Learn More











ASP
Nanotechnology Now Featured Books




NNN

The Hunger Project