Nanotechnology Now

Our NanoNews Digest Sponsors
Heifer International



Home > Press > Influential Interfaces Lead to Advances in Organic Spintronics

Sujitra Pookpanratana applies the organic monolayers onto the cobalt surfaces to tune the magnetic properties of the Co-molecule interface.
Sujitra Pookpanratana applies the organic monolayers onto the cobalt surfaces to tune the magnetic properties of the Co-molecule interface.

Abstract:
Spintronics is an emerging field of electronics in which devices work by manipulating the quantum mechanical spin1 of electrons, in addition to their elementary electric charge. Just as conventional transistors have a source of electrons, a gate to control their movement, and a drain to carry off the charge signal, a spintronic circuit needs a well-controlled source of spin-polarized electrons that are injected into a transport channel material, a well-defined method of controlling the spin through the material, and a system to detect the spin signal. Additionally, it requires a transport channel material with long spin lifetimes because (polarized) spins fade away (i.e., become randomized) and lose their information during transport, unlike electric charges.

Influential Interfaces Lead to Advances in Organic Spintronics

Gaithersburg, MD | Posted on July 1st, 2015

Compared to manipulating populations of moving electrons through a conventional semiconductor, controlling electron spins consumes much less energy and has the further advantage that its information content is “non-volatile”: because the information is moved and stored in the form of magnetic states, it doesn’t disappear when the electricity is turned off.

Spintronic devices made of inorganic materials are used today for read heads on hard disk drives, magnetoresistive random access memory (MRAM), and other applications. But recently there is growing worldwide interest in the use of organic materials, which offer numerous potential benefits:
Spin-polarized electrons are predicted to have long lifetimes in organic semiconductors;
Spin-based devices integrated with organic materials are expected to have low fabrication costs, light weight, and mechanical flexibility; and
Organic materials have nearly limitless possibilities of chemical design that can be used to tune desired electronic and physical properties.

Designing, understanding, and controlling the interface formation between molecular semiconductors and ferromagnets are important to the development of organic spintronics because the interface plays a critical role in determining the efficiency of spin injection and detection. Scientists from PML’s Semiconductor and Dimensional Metrology Division have performed studies on the way the interface between a ferromagnetic material (cobalt) and an organic semiconductor known as Alq3 can be altered by coating the cobalt with a single-molecule thick layer (monolayer) that affects the electron spin states of the cobalt. Cobalt is one of most widely used materials for spin injection/detection, and so is Alq3 for spin transport.

Project Leader Christina Hacker elaborates: “Cobalt surfaces are really interesting for electronic applications. If we can place molecular layers on them, and control the properties of that combination, it opens up a whole new range of things that we can do.”

Cobalt oxidizes rapidly however, making it a challenging substrate on which to attach a monolayer.
In the first of two separate, but complementary studies,2 Hacker’s team studied the effects of adding a self-assembled monolayer (SAM)3 to both a pure cobalt surface and a cobalt surface that was allowed to oxidize. The SAMs studied were octadecanethiol (ODT) and mercaptohexadecanoic acid (MHA). The SAMs’ effects on the surfaces of the cobalt substrates were compared and contrasted. As a bifunctional molecule (i.e., molecules in which both sides can bond to a surface), the MHA provided especially interesting results.

“The oxidation at the interface was highly affected by those molecules which were bifunctional,” explained Sujitra Pookpanratana, the lead scientist on this study. The data suggest that the MHA monolayer actually etched away much of the oxidized layer from the cobalt, allowing the cobalt atoms to become accessible at the surface, which is critical in electronic transport through the SAM and into the organic semiconductor. This finding suggests that the rapid oxidation of cobalt does not necessarily have to be a limiting factor in organic spintronics.

In the second study,4 the same molecular layers and the same substrate (cobalt, this time non-oxidized) were stacked onto a layer of Alq3. X-ray magnetic circular dichroism (XMCD) measurements were performed, in a collaborative effort with Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Lab, to examine the spin characteristics.

The SAMs altered the spin magnetic moment, morphology, and energy band alignment of the materials differently depending on the SAM being studied. In a critical finding, the data imply that the SAMs reduced the molecular hybridization between Co and Alq3, and, furthermore, enhanced the spin magnetic moment of Co at the interface which is expected to improve spin polarization at the point of spin injection into an organic semiconductor, Alq3.

Hyuk-Jae Jang, the leader of this study, explains the significance: “The interface between two different materials is very important in determining the performance and efficiency of electronic devices. By manipulating the interface between cobalt and Alq3, we show that there are a lot of things we can do to tune the spintronic characteristics of the organic-based device. Particularly from the XMCD measurements, we found that the spin polarization can be enhanced at the interface by simple interface engineering. This is helpful in efficient injection of the spin-polarized charge carrier from ferromagnetic materials to organic materials.”

The current work is part of a long-term effort to understand how adjusting the composition of an interface with organic semiconductor materials can control spintronic properties.
“For a complete spintronic device, we need spin injection, spin transport, and spin detection,” Jang explains. “Our latest work with SAMs only concerns the interface relevant to the spin injection part. The next step should be to find a better medium for spin transport since only short-distance—a couple of hundred nanometers—of spin transport has been demonstrated in organic materials such as Alq3 so far. There have been studies suggesting that long-distance spin transport in organics is achievable. Our grand plan is to make a whole device and show really long-distance (in this tiny device, over a micrometer) spin transport through an organic semiconductor.”


1Spin is a term used in physics to describe intrinsic angular momentum of objects on the atomic scale. Although an electron does not physically spin, it behaves as if it were spinning on its axis. Spin is quantized, and can take one of two values, conventionally called spin up and spin down. (A natural binary, 0 or 1, condition.) A random collection of electrons in non-magnetic materials has equal proportions of up and down. The imbalance in the proportions (namely, spin polarization) can occur, however, as the electrons travel through a magnetizable (ferromagnetic) material such as cobalt, iron, or nickel.

2S.J. Pookpanratana, L. Lydecker, C. A. Richter, C. A. Hacker, "Self-Assembled
Monolayers Impact Cobalt Interfacial Structure in Nanoelectronic Junctions"
Journal of Physical Chemistry C, Vol. 119, No. 12, pp. 6687-6695, (05-Mar-2015)

3Self-assembled monolayers are organic molecular sheets that form spontaneously as they are adsorbed onto surfaces – in this case, onto the surface of cobalt.

4H.J. Jang, J.S. Lee, S. J. Pookpanratana, I. C. Tran, C. A. Richter, C. A.
Hacker, "Modifying spin injection characteristics in the Co/Alq3
system by using a molecular self-assembled monolayer" Journal of Physical
Chemistry C, (19-May-2015)

####

For more information, please click here

Contacts:
Christina Hacker
301-975-2233

Copyright © The National Institute of Standards and Technology (NIST)

If you have a comment, please Contact us.

Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.

Bookmark:
Delicious Digg Newsvine Google Yahoo Reddit Magnoliacom Furl Facebook

Related News Press

News and information

Researchers develop artificial building blocks of life March 8th, 2024

How surface roughness influences the adhesion of soft materials: Research team discovers universal mechanism that leads to adhesion hysteresis in soft materials March 8th, 2024

Two-dimensional bimetallic selenium-containing metal-organic frameworks and their calcinated derivatives as electrocatalysts for overall water splitting March 8th, 2024

Curcumin nanoemulsion is tested for treatment of intestinal inflammation: A formulation developed by Brazilian researchers proved effective in tests involving mice March 8th, 2024

Laboratories

A battery’s hopping ions remember where they’ve been: Seen in atomic detail, the seemingly smooth flow of ions through a battery’s electrolyte is surprisingly complicated February 16th, 2024

NRL discovers two-dimensional waveguides February 16th, 2024

Catalytic combo converts CO2 to solid carbon nanofibers: Tandem electrocatalytic-thermocatalytic conversion could help offset emissions of potent greenhouse gas by locking carbon away in a useful material January 12th, 2024

Three-pronged approach discerns qualities of quantum spin liquids November 17th, 2023

Govt.-Legislation/Regulation/Funding/Policy

What heat can tell us about battery chemistry: using the Peltier effect to study lithium-ion cells March 8th, 2024

Researchers’ approach may protect quantum computers from attacks March 8th, 2024

The Access to Advanced Health Institute receives up to $12.7 million to develop novel nanoalum adjuvant formulation for better protection against tuberculosis and pandemic influenza March 8th, 2024

Optically trapped quantum droplets of light can bind together to form macroscopic complexes March 8th, 2024

Spintronics

Researchers discover a potential application of unwanted electronic noise in semiconductors: Random telegraph noises in vanadium-doped tungsten diselenide can be tuned with voltage polarity August 11th, 2023

Quantum materials: Electron spin measured for the first time June 9th, 2023

Rensselaer researcher uses artificial intelligence to discover new materials for advanced computing Trevor Rhone uses AI to identify two-dimensional van der Waals magnets May 12th, 2023

Spin photonics to move forward with new anapole probe November 4th, 2022

Chip Technology

New chip opens door to AI computing at light speed February 16th, 2024

HKUST researchers develop new integration technique for efficient coupling of III-V and silicon February 16th, 2024

Electrons screen against conductivity-killer in organic semiconductors: The discovery is the first step towards creating effective organic semiconductors, which use significantly less water and energy, and produce far less waste than their inorganic counterparts February 16th, 2024

NRL discovers two-dimensional waveguides February 16th, 2024

Discoveries

What heat can tell us about battery chemistry: using the Peltier effect to study lithium-ion cells March 8th, 2024

Researchers’ approach may protect quantum computers from attacks March 8th, 2024

High-tech 'paint' could spare patients repeated surgeries March 8th, 2024

Nanoscale CL thermometry with lanthanide-doped heavy-metal oxide in TEM March 8th, 2024

Announcements

What heat can tell us about battery chemistry: using the Peltier effect to study lithium-ion cells March 8th, 2024

Curcumin nanoemulsion is tested for treatment of intestinal inflammation: A formulation developed by Brazilian researchers proved effective in tests involving mice March 8th, 2024

The Access to Advanced Health Institute receives up to $12.7 million to develop novel nanoalum adjuvant formulation for better protection against tuberculosis and pandemic influenza March 8th, 2024

Nanoscale CL thermometry with lanthanide-doped heavy-metal oxide in TEM March 8th, 2024

Interviews/Book Reviews/Essays/Reports/Podcasts/Journals/White papers/Posters

Researchers develop artificial building blocks of life March 8th, 2024

How surface roughness influences the adhesion of soft materials: Research team discovers universal mechanism that leads to adhesion hysteresis in soft materials March 8th, 2024

Curcumin nanoemulsion is tested for treatment of intestinal inflammation: A formulation developed by Brazilian researchers proved effective in tests involving mice March 8th, 2024

Nanoscale CL thermometry with lanthanide-doped heavy-metal oxide in TEM March 8th, 2024

NanoNews-Digest
The latest news from around the world, FREE




  Premium Products
NanoNews-Custom
Only the news you want to read!
 Learn More
NanoStrategies
Full-service, expert consulting
 Learn More











ASP
Nanotechnology Now Featured Books




NNN

The Hunger Project