Nanotechnology Now

Our NanoNews Digest Sponsors
Heifer International



Home > Press > Tuning the bonds of paired quantum particles to create dissipationless flow: A tunable platform made from atomically thin materials may help researchers figure out how to create a robust quantum condensate that can flow without losing energy

An illustration of positively charged holes interacting with negatively charged electrons between two sheets of graphene to form a bosonic pair

CREDIT
Cory R. Dean, Columbia University
An illustration of positively charged holes interacting with negatively charged electrons between two sheets of graphene to form a bosonic pair CREDIT Cory R. Dean, Columbia University

Abstract:
Electrons flowing through power lines and computers inevitably encounter resistance; when they do, they lose some of their energy, which dissipates as heat. That’s why laptops get hot after being used for too long and why the server farms that power the cloud require so much air conditioning to keep the machines from overheating. Likewise, any particles carrying energy tend to lose that energy when they flow in a typical environment. There are a few exceptions, which usually occur at very low temperatures when particles form pairs called quantum condensates. This leads to superconductivity, with vanishing electrical resistance, in some metals such as aluminum, and superfluidity in liquified helium, which can then flow without dissipation.

Tuning the bonds of paired quantum particles to create dissipationless flow: A tunable platform made from atomically thin materials may help researchers figure out how to create a robust quantum condensate that can flow without losing energy

New York, NY | Posted on January 14th, 2022

Many applications, from dissipationless power transmission to quantum computation, have been developed based on superconducting materials showing these quantum condensate states. But, known superconducting materials need to be kept cold—often impractically so. To raise the temperature of energy-loss-free devices, researchers need to better understand what drives the formation of quantum condensates in the first place.



In theory, superconductivity is the result of paired electrons. In most materials however that pairing is weak—two negatively charged particles don’t normally want to pair with each other—and the pairing strength is fixed. In a new article in Science, Cory Dean and James Hone at Columbia, Xiaomeng Liu, Philip Kim, and Bert Halperin at Harvard, Jia Li at Brown, and Kenji Watanabe and Takashi Taniguchi at NIMS in Japan describe a tunable, graphene-based platform that uses opposite charges—electrons and holes—to form quantum particle pairs under strong magnetic fields. The strength of that pairing can now be varied along a continuum, which will allow the team to test theoretical predictions about the origins of quantum condensates and how they might increase the temperature limits of superconductivity.



Designing a Tunable Platform

The underlying theory is simple enough. “If you can get electrons to pair, they can superconduct,” said Dean. According to the Bardeen-Cooper-Schrieffer (BCS) theory, an attractive force between electrons—no matter how weak—will cause those electrons to pair up and form a new kind of particle called a “Cooper pair.” These behave like particles called bosons and, at low enough temperatures, can enter into a collective state and move through a material unimpeded by disorder—a feature any single electron just cannot achieve on its own.



But there’s been a problem. “Electrons do not want to pair,” said Dean. Like repels like, as the saying goes. Rather than trying to force a bond between two negatively charged electrons, the team has been exploring how opposites can attract to yield an equivalent ‘paired’ boson.



The general idea, which was first proposed by theoretical physicists, is now being realized by the team in atom-thin sheets of graphene, a material with unique properties that they have been working to leverage for several years. Depending on the voltages and magnetic fields applied, graphene sheets can be made that are populated with either negatively charged electrons or with positively charged holes. When two such sheets are put together, electrons on one sheet will want to pair with oppositely charged holes on the other, forming the bosonic pair.



Some distance is still needed. “People first tried to pair up electrons and holes in a single material and yes there is attraction between them, but in a sense the attraction is too strong,” said Liu, the lead author of the paper. If the two get too close, they’ll combine and disappear. Using a technique developed at Columbia to create layered stacks of different atom-thin materials, the team added layers of insulating boron nitride between the graphene in their platform. This created physical distance between electrons on one graphene sheet and holes on another, which also influenced the strength of the interaction: more insulating layers yielded a weaker bond; fewer layers, a stronger one. “By varying the thickness of that separation layer, we have direct, tunable control over the interaction strength,” said Li, another lead author of this work.



Electrons and holes don’t just need to interact with each other; the bosonic pairs they form also need to interact with other pairs to reach a collective quantum condensate state. By tweaking the number of insulating layers, the team could control the binding strength between the electrons and holes, while changing the external magnetic field adjusted the interaction between bosonic pairs.



Crossing Over to Raise the Temperature

Most superconducting materials can only exist at extremely cold temperatures, typically less than 10 Kelvin (or -441 degrees Fahrenheit). However in certain materials, called high temperature superconductors, the pair state survives to temperatures as high as 200K (-100 degrees Fahrenheit). Although still very cold, the existence of high temperature superconductors suggests that quantum condensate could occur at room temperature. Despite several decades of research however, the progress to realize even higher temperature quantum condensates using either electron-electron pairs or electron-hole pairs has been slow.



One theory is that high temperature superconductors result from electron pairing that is neither “weak” nor “strong,” but exists at the crossover between these two extremes. Studying strong bosonic pairing—described by the Bose-Einstein Condensate (BEC) Theory—has been a challenge in high temperature superconductors, since electrons naturally repel one another, and controlling their interaction is difficult. With their tunable graphene platform that combines electrons with holes rather than electron-electron pairs, the team can now map for the first time how conductivity changes as pairing strength is shifted between the BEC and BCS extremes.



Here, the experiments took place at liquid-Helium temperatures—negative 450 degrees Fahrenheit—and under a strong, 10 Tesla magnet (about 100 times stronger than a typical fridge magnet); neither condition is practical to build real devices that might operate on a chip inside a computer. But, said Dean, the work opens up new avenues of investigation. “Because of the tunability of this platform, we can test theoretical predictions in ways that have not previously been accessible,” he said.



With different materials, it may also be possible to lose the magnet, which is needed to get graphene’s normally non-interactive electrons moving. For example, semiconductors can be manipulated to be full of electrons and/or full of holes. Getting such sheets to form stable electron-hole pairs will come down to technicalities, like how ‘clean’ and defect-free the materials are and whether you can make appropriate contact between them. “If such electron-hole pair condensates—also called exciton condensates—can be stabilized at high temperatures and without a magnetic field, this might lead to practical uses,” said Halperin, a physicist from Harvard.



“What we’re establishing with this graphene platform is that the underlying concept is absolutely sound,” said Dean. “It’s no longer fantasy; it’s reality. Now it becomes, in a sense, an engineering challenge.”

####

For more information, please click here

Contacts:
Ellen Neff
Columbia University

Office: 212-853-8048

Copyright © Columbia University

If you have a comment, please Contact us.

Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.

Bookmark:
Delicious Digg Newsvine Google Yahoo Reddit Magnoliacom Furl Facebook

Related Links

ARTICLE TITLE

Related News Press

News and information

Drawing data in nanometer scale September 30th, 2022

Researchers unveil mystery inside Li- o2 batteries September 30th, 2022

Synthesis of air-stable room-temperature van der Waals magnetic thin flakes September 30th, 2022

ACM Research Launches New Furnace Tool for Thermal Atomic Layer Deposition to Support Advanced Semiconductor Manufacturing Requirements: Ultra Fn A Furnace Tool Shipped to China-Based Foundry Customer September 30th, 2022

Exquisitely thin membranes can slash energy spent refining crude oil into fuel and plastic: Queen Mary scientists have created a new type of nanomembrane that presents a less energy intensive way to fractionate hydrocarbons from crude oil September 30th, 2022

Physics

Layer Hall effect and hidden Berry curvature in antiferromagnetic insulators September 30th, 2022

Bound by light: Glass nanoparticles show unexpected coupling when levitated with laser light August 26th, 2022

Led by Columbia Engineering, researchers build longest, highly conductive molecular nanowire: The 2.6nm-long single molecule wire has quasi-metallic properties and shows an unusual increase of conductance as the wire length increases; its excellent conductivity holds great promis July 8th, 2022

Flexing the power of a conductive polymer: A new material holds promise for the next generation of organic electronics June 24th, 2022

Quantum Physics

Key element for a scalable quantum computer: Physicists from Forschungszentrum Jülich and RWTH Aachen University demonstrate electron transport on a quantum chip September 23rd, 2022

Lattice distortion of perovskite quantum dots induces coherent quantum beating September 9th, 2022

Bound by light: Glass nanoparticles show unexpected coupling when levitated with laser light August 26th, 2022

Exploring quantum electron highways with laser light: Spiraling laser light reveals how topological insulators lose their ability to conduct electric current on their surfaces. August 19th, 2022

Magnetism/Magnons

Scientists take control of magnetism at the microscopic level: Neutrons reveal remarkable atomic behavior in thermoelectric materials for more efficient conversion of heat into electricity August 26th, 2022

Graphene/ Graphite

Buckyballs on gold are less exotic than graphene July 22nd, 2022

A novel graphene based NiSe2 nanocrystalline array for efficient hydrogen evolution reaction July 15th, 2022

Possible Futures

Researchers unveil mystery inside Li- o2 batteries September 30th, 2022

Synthesis of air-stable room-temperature van der Waals magnetic thin flakes September 30th, 2022

Layer Hall effect and hidden Berry curvature in antiferromagnetic insulators September 30th, 2022

ACM Research Launches New Furnace Tool for Thermal Atomic Layer Deposition to Support Advanced Semiconductor Manufacturing Requirements: Ultra Fn A Furnace Tool Shipped to China-Based Foundry Customer September 30th, 2022

Discoveries

Surface microstructures of lunar soil returned by Chang’e-5 mission reveal an intermediate stage in space weathering process September 30th, 2022

Researchers unveil mystery inside Li- o2 batteries September 30th, 2022

Synthesis of air-stable room-temperature van der Waals magnetic thin flakes September 30th, 2022

Layer Hall effect and hidden Berry curvature in antiferromagnetic insulators September 30th, 2022

Announcements

Researchers unveil mystery inside Li- o2 batteries September 30th, 2022

Synthesis of air-stable room-temperature van der Waals magnetic thin flakes September 30th, 2022

Layer Hall effect and hidden Berry curvature in antiferromagnetic insulators September 30th, 2022

ACM Research Launches New Furnace Tool for Thermal Atomic Layer Deposition to Support Advanced Semiconductor Manufacturing Requirements: Ultra Fn A Furnace Tool Shipped to China-Based Foundry Customer September 30th, 2022

Interviews/Book Reviews/Essays/Reports/Podcasts/Journals/White papers/Posters

Conformal optical black hole for cavity September 30th, 2022

Cleveland researchers reveal new strategy to prevent blood clots without increasing the risk of bleeding: University Hospitals and Case Western Reserve University findings may be especially impactful for cancer patients who experience blood clot complications September 30th, 2022

Ultrasmall VN/Co heterostructure with optimized N active sites anchored in N-doped graphitic nanocarbons for boosting hydrogen evolution September 30th, 2022

Layer Hall effect and hidden Berry curvature in antiferromagnetic insulators September 30th, 2022

NanoNews-Digest
The latest news from around the world, FREE




  Premium Products
NanoNews-Custom
Only the news you want to read!
 Learn More
NanoStrategies
Full-service, expert consulting
 Learn More











ASP
Nanotechnology Now Featured Books




NNN

The Hunger Project