- About Us
- Career Center
- Nano-Social Network
- Nano Consulting
- My Account
Carbon nanotube (CNT-) based continuous fiber, a CNT assembly that could potentially retain the superb properties of individual CNTs on a macroscopic scale, belongs to a fascinating new class of electronic materials with potential applications in electronics, sensing, and conducting wires.
Now, researchers have reported, for the first time, the fabrication of CNT-fiber-based stretchable conductors by a simple prestraining-then-buckling approach. Upon release of the prestrain, the CNT fibers are readily kinked in-plane because of their high flexibility. This buckled shape is quite different from the sinusoidal shape observed previously in otherwise analogous systems.
Furthermore, the performance of the CNT fiber/PDMS composite film as a stretchable conductor has been tested under cyclic tensile loading. Very little variation in resistance (~1%) under multiple stretching-and-releasing cycles up to a prestrain level of 40% is observed, indicating the outstanding stability and repeatability in performance of CNT fiber/PDMS composite films as stretchable conductors. Together with their continuously improving mechanical performance, CNT fibers possessing the unique stretchability that has been demonstrated are expected to further improve their applicability as reinforcements for multifunctional composites.
For more information, please click here
Copyright © Wiley-VCH Materials Science JournalsIf you have a comment, please Contact us.
Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.
|Related News Press|
News and information
The quantum middle man July 2nd, 2015
Emergence of a 'devil's staircase' in a spin-valve system July 1st, 2015
Exagan Raises €5.7 Million to Produce High-efficiency GaN-on-Silicon Power-switching Devices on 200mm Wafers: Leti-and-Soitec Spinout Focused on Becoming Leading European Source Of GaN Devices for Solar, Automotive, Telecoms and Infrastructure June 25th, 2015
Nanowires could be the LEDs of the future June 25th, 2015
Leti to Present Solutions to New Applications Using 3D Technologies at SEMICON West LetiDay Event, July 14: Leti Experts also Will Speak at TechXPOT Session on MEMS and STS Session on Lithography Cost-and-Productivity Issues Below 14nm June 22nd, 2015
Producing spin-entangled electrons July 2nd, 2015