Nanotechnology Now

Our NanoNews Digest Sponsors





Heifer International

Wikipedia Affiliate Button


android tablet pc

Home > Press > OE-A at drupa 2012

Abstract:
Printed electronics is a special topic at drupa 2012, the world's leading trade
show for the printing industry, in Düsseldorf. The OE-A (Organic and Printed
Electronics Association) is partnering with the conference „Future of Print:
Printed Electronics" on May 12, 2012 and the special show "Printed
Electronics" in hall 7.0. drupa will take place from May 03 to 16, 2012 in
Düsseldorf, Germany.

OE-A at drupa 2012

Frankfurt/Main, Germany | Posted on April 24th, 2012

Organic and printed electronics enables new
applications and opens up new perspectives for the established printing and packaging
industry. "As the world's leading trade show for the printing industry, drupa is an
extremely important marketplace that enables us to inform the printing industry about
these revolutionary technologies," says Dr. Stephan Kirchmeyer, Chairman of the
OE-A Board of Directors and Head of the Business Unit Functional Coatings at
Heraeus Precious Metals GmbH & Co. KG.

OE-A Conference on May 12th

The conference "Future of Print I: Printed Electronics" is organized by the OE-A and
will be held on the morning of May 12th at the drupa cube in hall 7.A. The focus of the
presentations is on actual applications and products enabled by this new technology.
The high-level conference program includes presentations by Heraeus, Holst Centre,
PolyIC, Plastic Logic, Printechnologics and VTT, featuring topics such as touch
screens, organic photovoltaics, OLEDs, intelligent packaging, sensors, medical
applications, e-readers and crossmedia applications.

OE-A at drupa innovation parc

The OE-A is also collaborating with the special show "Printed Electronics" at drupa
innovation parc in hall 7.0. The OE-A will be presenting a number of applications at
drupa which have resulted from collaboration among its international member
companies: from interactive books and intelligent packaging to sensors, displays and
flexible solar cells.

Visitors to the OE-A booth will receive a comprehensive industry guide on printed
electronics, including the OE-A roadmap and a credit-card sized, energy self-sufficient
flashlight that includes a printed solar cell, a printed circuit board and a flexible battery.
The OE-A booth is in hall 7.0/E20.

####

About OE-A (Organic and Printed Electronics Association)
The OE-A (Organic and Printed Electronics Association) was founded in December 2004 and is the leading
international industry association for organic and printed electronics. Our members are world-class global
companies and institutions, ranging from R&D institutes, component and material suppliers to producers and
end-users and represent the entire value chain of this emerging industry. More than 190 companies from Europe,
North America, Asia and Australia are working together to promote the establishment of a competitive production
infrastructure for organic and printed electronics. The vision of the OE-A is to build a bridge between science,
technology and application. The OE-A is a working group within the German Engineering Federation (VDMA).
More than 3,000 member companies from the engineering industry make VDMA the largest industry association in Europe.

The OE-A and Messe Munich International are the hosts of the premier international conference and exhibition,
LOPE-C 2012, to be held June 19-21, 2012 at ICM, New Messe Munich Trade Fair Center, Germany.

Further Information and photos: www.oe-a.org and www.lope-c.com

For more information, please click here

Contacts:
Dr. Klaus Hecker, Managing Director OE-A
Tel.: +49-69-6603-1336,
_____________________________________________________________________

Alena Siebecke
Project Assistant
OE-A (Organic and Printed Electronics Association)
A working group within VDMA
Lyoner Str. 18
D-60528 Frankfurt
Germany
Phone:+49-69 6603 1737
Fax:+49-69 6603 2737

www.vdma.org/oe-a
www.oe-a.org
www.lope-c.com

If you have a comment, please Contact us.

Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.

Bookmark:
Delicious Digg Newsvine Google Yahoo Reddit Magnoliacom Furl Facebook

Related News Press

News and information

Tough foam from tiny sheets: Rice University lab uses atom-thick materials to make ultralight foam July 29th, 2014

Zenosense, Inc. July 29th, 2014

Optimum inertial design for self-propulsion: A new study investigates the effects of small but finite inertia on the propulsion of micro and nano-scale swimming machines July 29th, 2014

A new way to make microstructured surfaces: Method can produce strong, lightweight materials with specific surface properties July 29th, 2014

Display technology/LEDs/SS Lighting/OLEDs

Martini Tech Inc. becomes the exclusive distributor for Yoshioka Seiko Co. porous chucks for Europe and North America July 20th, 2014

Carbodeon enables 20 percent increase in polymer thermal filler conductivity with 0.03 wt.% nanodiamond additive at a lower cost than with traditional fillers: Improved materials and processes enable nanodiamond cost reductions of up to 70 percent for electronics and LED app July 9th, 2014

'Nano-pixels' promise thin, flexible, high resolution displays July 9th, 2014

Projecting a Three-Dimensional Future: TAU researchers develop holography technology that could change the way we view the world July 9th, 2014

Flexible Electronics

Nanoengineers Develop Basis for Electronics That Stretch at the Molecular Level May 8th, 2014

Energy device for flexible electronics packs a lot of power May 7th, 2014

Flexible battery, no lithium required: Rice University lab creates thin-film battery for portable, wearable electronics April 28th, 2014

Transparent Conductive Films and Sensors Are Hot Segments in Printed Electronics: Start-ups in these fields show above-average momentum, while companies working on emissive displays such as OLED are fading, Lux Research says April 17th, 2014

Sensors

Production of Toxic Gas Sensor Based on Nanorods July 28th, 2014

Compact Vibration Harvester Power Supply with Highest Efficiency Opens Door to “Fix-and-Forget” Sensor Nodes July 23rd, 2014

Nano-sized Chip "Sniffs Out" Explosives Far Better than Trained Dogs: TAU researcher's groundbreaking sensor detects miniscule concentrations of hazardous materials in the air July 23rd, 2014

Tiny laser sensor heightens bomb detection sensitivity July 19th, 2014

Announcements

Tough foam from tiny sheets: Rice University lab uses atom-thick materials to make ultralight foam July 29th, 2014

Zenosense, Inc. July 29th, 2014

Optimum inertial design for self-propulsion: A new study investigates the effects of small but finite inertia on the propulsion of micro and nano-scale swimming machines July 29th, 2014

A new way to make microstructured surfaces: Method can produce strong, lightweight materials with specific surface properties July 29th, 2014

Energy

Oregon chemists eye improved thin films with metal substitution: Solution-based inorganic process could drive more efficient electronics and solar devices July 21st, 2014

Steam from the sun: New spongelike structure converts solar energy into steam July 21st, 2014

3-D nanostructure could benefit nanoelectronics, gas storage: Rice U. researchers predict functional advantages of 3-D boron nitride July 15th, 2014

Nanotechnology that will impact the Security & Defense sectors to be discussed at NanoSD2014 conference July 8th, 2014

Events/Classes

WITec to host the 11th Confocal Raman Imaging Symposium from September 29th - October 1st in Ulm, Germany July 28th, 2014

FEI adds Phase Plate Technology and Titan Halo TEM to its Structural Biology Product Portfolio: New solutions provide the high-quality imaging and contrast necessary to analyze the 3D structure of molecules and molecular complexes July 28th, 2014

NNCO Announces an Interactive Webinar: Progress Review on the Coordinated Implementation of the National Nanotechnology Initiative 2011 Environmental, Health, and Safety Research Strategy July 23rd, 2014

Harris & Harris Group to Host Conference Call on Second-Quarter 2014 Financial Results on August 15, 2014 July 23rd, 2014

Solar/Photovoltaic

Steam from the sun: New spongelike structure converts solar energy into steam July 21st, 2014

Making dreams come true: Making graphene from plastic? July 2nd, 2014

Shrinky Dinks close the gap for nanowires July 1st, 2014

New Study Raises Possibility of Production of P-Type Solar Cells July 1st, 2014

Printing/Lithography/Inkjet/Inks

Martini Tech Inc. becomes the exclusive distributor for Yoshioka Seiko Co. porous chucks for Europe and North America July 20th, 2014

University of Illinois researchers demonstrate novel, tunable nanoantennas July 14th, 2014

Haydale Announces Collaboration Agreement with Swansea University’s Welsh Centre for Printing and Coatings (WCPC) July 12th, 2014

Leti to Present Technological Platforms Targeting Industry’s Needs for the Future at Semicon West Workshop: Presentation at STS Session to Focus on Leti Advanced Lithography Programs for 1x Nodes and on Silicon Photonics at TechXPot June 25th, 2014

NanoNews-Digest
The latest news from around the world, FREE



  Premium Products
NanoNews-Custom
Only the news you want to read!
 Learn More
NanoTech-Transfer
University Technology Transfer & Patents
 Learn More
NanoStrategies
Full-service, expert consulting
 Learn More














ASP
Nanotechnology Now Featured Books




NNN

The Hunger Project







© Copyright 1999-2014 7th Wave, Inc. All Rights Reserved PRIVACY POLICY :: CONTACT US :: STATS :: SITE MAP :: ADVERTISE