Nanotechnology Now

Our NanoNews Digest Sponsors

Heifer International

Wikipedia Affiliate Button

Home > Press > NIL Technology Attracts Senior Experience to Its Management

Abstract:
The continuously-expanding nanotechnology company NIL Technology has recruited Mr. Peixiong Shi, a senior master within the field of nanofabrication, to its management team. Mr. Shi will take up the position of Chief Production Officer (CPO). He will assist NIL Technology in the expansion of its production capabilities and capacity to meet the large potential demand in the nanoimprint market.

NIL Technology Attracts Senior Experience to Its Management

NIL Technology | Posted on January 10th, 2008

Peixiong Shi received his Ph.D. degree in Physics from Aarhus University in Denmark (1992). His previous management experience includes the position as processing manager at Nanovation Inc., where he was responsible for setting up a 6-inch Silicon wafer production line for photonic devices, and the position as Manufacturing Director at a California-based start-up company (E2O), where he was responsible for the daily operation of their production facility. He has published over 30 technical papers and served in the program committee of the Nordic Association of Contamination Control (R3 Nordic). Mr. Peixiong Shi has been working in the field of micro- and nano-fabrication for over 14 years and is highly experienced in electron beam lithography and dry-etching - key elements in production by nanoimprint lithography. He comes from a position as Senior Process Engineer at the Danish National Cleanroom facility (DTU Danchip).

This executive expansion adds senior experience within industrial production, technology development and cleanroom management to our management team. This is an important step toward the future establishment of volume production by nanoimprint lithography.

"Nanoimprint lithography is a very interesting technology and one of the most promising technologies to take nanotechnology to industrial scale production. I look forward to using my experience within the field of nanofabrication to participate in bringing today's nanotechnology into volume production by nanoimprint lithography", commented Mr. Peixiong Shi.

"Attracting a renowned expert within micro- and nanofabrication such as Mr. Peixiong Shi to the company puts us in a favorable position to exploit the large potential for industrial nano-scale production in the future through nanoimprint lithography", declared Theodor Nielsen, CEO, NIL Technology.

####

About NIL Technology
Our stamps are engineered to order from customer defined specifications regarding patterns materials and formats

* Stamp structure sizes below 20 nm
* Up to 150 mm round and square stamps
* Stamp materials: Silicon, Quartz, and Nickel
* Stamps for all NIL tool formats

NIL Technology manufactures and sells stamps for nanoimprint lithography (NIL), provides imprint service, production by NIL, consultancy and enters into joint development of novel applications benefiting from nano-scale structures.

Our stamps can be used in many different applications such as (but not limited to):

* Renewable energy
* Micro and nano fluidics
* Light-emitting diodes and lasers
* Life science, e.g. lab-on-a-chip systems
* Optics
* Radio frequency (RF) components
* Data storage
* Security
* Semiconductor

Interested partners are invited to join collaborations with NIL Technology on developing products benefiting from nanostructures and NIL.
NIL Technology offers a market leading weekly newsletter to keep leading industry people, engineers as well as businessmen, updated with the latest news within nanoimprint lithography and nanotechnology in general.

For more information, please click here

Contacts:
NIL Technology ApS
Oersteds Plads DTU – Building 347
DK-2800 Kongens Lyngby
Denmark

NIL Technology ApS
Theodor Nielsen, CEO
Direct: +45 3171 9036
E-mail:

Copyright © NIL Technology ApS

If you have a comment, please Contact us.

Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.

Bookmark:
Delicious Digg Newsvine Google Yahoo Reddit Magnoliacom Furl Facebook

Related News Press

News and information

A new product to help combat mouldy walls, thanks to technology developed at the ICN2 December 14th, 2017

Sandia researchers make solid ground toward better lithium-ion battery interfaces: Reducing the traffic jam in batteries December 13th, 2017

Perking up and crimping the 'bristles' of polyelectrolyte brushes December 13th, 2017

Columbia engineers create artificial graphene in a nanofabricated semiconductor structure: Researchers are the first to observe the electronic structure of graphene in an engineered semiconductor; finding could lead to progress in advanced optoelectronics and data processing December 13th, 2017

Law enforcement/Anti-Counterfeiting/Security/Loss prevention

Counterfeits and product piracy can be prevented by security features, such as printed 3-D microstructures: Forgeries and product piracy are detrimental to society and industry -- 3-D microstructures can increase security -- KIT researchers develop innovative fluorescent 3-D stru November 15th, 2017

A dash of gold improves microlasers: The precious metal provides a 'nano' solution for improving disease detection, defense and cybersecurity applications October 9th, 2017

Graphene based terahertz absorbers: Printable graphene inks enable ultrafast lasers in the terahertz range September 13th, 2017

Leti and Partners in PiezoMAT Project Develop New Fingerprint Technology for Highly Reliable Security and ID Applications: Ultra-high Resolution Pressure Sensing Uses Matrices of Vertical Piezoelectric Nanowire To Reconstruct the Smallest Features of Human Fingerprints September 5th, 2017

Chip Technology

Columbia engineers create artificial graphene in a nanofabricated semiconductor structure: Researchers are the first to observe the electronic structure of graphene in an engineered semiconductor; finding could lead to progress in advanced optoelectronics and data processing December 13th, 2017

UCLA chemists synthesize narrow ribbons of graphene using only light and heat: Tiny structures could be next-generation solution for smaller electronic devices December 8th, 2017

Device makes power conversion more efficient: New design could dramatically cut energy waste in electric vehicles, data centers, and the power grid December 8th, 2017

Leti Integrates Hybrid III-V Silicon Lasers on 200mm Wafers with Standard CMOS Process December 6th, 2017

Memory Technology

Leti Breakthroughs Point Way to Significant Improvements in SoC Memories December 6th, 2017

Scientists make transparent materials absorb light December 1st, 2017

A material with promising properties: Konstanz scientist synthesizes an important ferromagnetic semiconductor November 25th, 2017

Injecting electrons jolts 2-D structure into new atomic pattern: Berkeley Lab study is first to show potential of energy-efficient next-gen electronic memory October 13th, 2017

Announcements

A new product to help combat mouldy walls, thanks to technology developed at the ICN2 December 14th, 2017

Sandia researchers make solid ground toward better lithium-ion battery interfaces: Reducing the traffic jam in batteries December 13th, 2017

Perking up and crimping the 'bristles' of polyelectrolyte brushes December 13th, 2017

Columbia engineers create artificial graphene in a nanofabricated semiconductor structure: Researchers are the first to observe the electronic structure of graphene in an engineered semiconductor; finding could lead to progress in advanced optoelectronics and data processing December 13th, 2017

Appointments/Promotions/New hires/Resignations/Deaths

Emmanuel Sabonnadiere is Leti’s New CEO November 28th, 2017

Nanometrics Board of Directors Names Pierre-Yves Lesaicherre President and CEO November 14th, 2017

180 Degree Capital Corp. Appoints Investment Banking Veteran Parker Weil to Its Board of Directors August 2nd, 2017

Nanometrics Announces Retirement Plans of CEO Timothy Stultz: Dr. Stultz to Continue as Director May 25th, 2017

Energy

Inorganic-organic halide perovskites for new photovoltaic technology November 6th, 2017

Dendritic fibrous nanosilica: all-in-one nanomaterial for energy, environment and health November 4th, 2017

New nanomaterial can extract hydrogen fuel from seawater: Hybrid material converts more sunlight and can weather seawater's harsh conditions October 4th, 2017

Researchers set time limit for ultrafast perovskite solar cells September 22nd, 2017

Photonics/Optics/Lasers

Leti Integrates Hybrid III-V Silicon Lasers on 200mm Wafers with Standard CMOS Process December 6th, 2017

Scientists make transparent materials absorb light December 1st, 2017

Going swimmingly: Biotemplates breakthrough paves way for cheaper nanobots: By using bacterial flagella as a template for silica, researchers have demonstrated an easier way to make propulsion systems for nanoscale swimming robots November 30th, 2017

Fast flowing heat in graphene heterostructures: Surprisingly fast heat flow from graphene to its surrounding November 29th, 2017

Alliances/Trade associations/Partnerships/Distributorships

A new product to help combat mouldy walls, thanks to technology developed at the ICN2 December 14th, 2017

JPK Instruments announce partnership with Swiss company, Cytosurge AG. The partnership makes Cytosurge’s FluidFM® technology available on the JPK NanoWizard® AFM platform December 8th, 2017

Nano Global, Arm Collaborate on Artificial Intelligence Chip to Drive Health Revolution by Capturing and Analyzing Molecular Data in Real Time November 21st, 2017

EC Project Aims at Creating and Commercializing Cyber-Physical-System Solutions November 14th, 2017

RFID

Nanowire 'inks' enable paper-based printable electronics: Highly conductive films make functional circuits without adding high heat January 4th, 2017

Conformal transfer of graphene for reproducible device fabrication August 11th, 2015

GLOBALFOUNDRIES Launches Industry’s First 22nm FD-SOI Technology Platform: 22FDX offers the best combination of performance, power consumption and cost for IoT, mainstream mobile, RF connectivity, and networking July 13th, 2015

New micro-supercapacitor structure inspired by the intricate design of leaves: A team of scientists in Korea has devised a new method for making a graphene film for supercapacitors July 2nd, 2015

Printing/Lithography/Inkjet/Inks/Bio-printing

Printing Flexible Graphene Supercapacitors December 1st, 2017

Math gets real in strong, lightweight structures: Rice University researchers use 3-D printers to turn century-old theory into complex schwarzites November 16th, 2017

Creation of coherent states in molecules by incoherent electrons October 21st, 2017

Graphene based terahertz absorbers: Printable graphene inks enable ultrafast lasers in the terahertz range September 13th, 2017

NanoNews-Digest
The latest news from around the world, FREE



  Premium Products
NanoNews-Custom
Only the news you want to read!
 Learn More
NanoTech-Transfer
University Technology Transfer & Patents
 Learn More
NanoStrategies
Full-service, expert consulting
 Learn More











ASP
Nanotechnology Now Featured Books




NNN

The Hunger Project